RESUMO
In mining safety and other fields, similar material simulation is the main research method to study the movement and deformation of rock formation and ground surface. However, the inaccurate subsidence laws could be obtained because the strength of the composition materials like gypsum and lime is easily affected by moisture. Therefore, it is crucial to monitor the moisture content when carrying simulation experiments. This paper discussed the feasibility of indirectly measuring the moisture content of similar material models using the three-dimensional (3D) laser scanning reflection intensity through three experiments on similar material specimens. The results showed that the laser reflection intensity was sensitive to the moisture content, incidence angle, and distance with three different relationships and the influence of the two factors could be weakened through the established correction models. However, it was recommended restricting the incidence angle to less than 20° and setting the distance from 4 to 10 m to reduce the complexity of correction. The accuracy of this method reached 1.1% under the monitoring condition of 4 m and the normal incidence, which could meet the requirements for monitoring the moisture content of similar material models. The research results of the paper provide a new method to monitor the moisture content in similar material models.
